LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (MULTIFUNCTION Electronic Modules -- XK/X150) >> MULTIFUNCTION Electronic Modules >> Driver Seat Module >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat control module.
    • Connect the electrical connectors.
    • Tighten the Torx bolts to 10 Nm (7 lb.ft).
  2. Install the front seat.

    For additional information, refer to: Front Seat Removal And Installation

scientia non olet · About LEMON Manuals