Removal And Installation: Removal
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
All vehicles
- Raise and support the vehicle.
- Remove the wheel and tire.
Vehicles with carbon ceramic brakes
- Remove 2 opposing wheel nuts.
- See figure:
- Remove the remaining wheel nuts and slide the wheel and tire over the guide tools.
- Remove the road wheel.
WARNING:
Make sure to support the vehicle with axle stands.
CAUTION:
Using power tools may result in damage to the wheel nuts. Make sure the wheel nuts are released using hand tools only.
CAUTION:
Using power tools may result in damage to the wheel nuts. Make sure the wheel nuts are released using hand tools only.
NOTE:
On vehicles fitted with carbon ceramic brake discs, remove two opposing wheel nuts and install the wheel guide pins supplied with the vehicle tool kit.
CAUTION:
Using power tools may result in damage to the wheel nuts. Make sure the wheel nuts are released using hand tools only.