Removal And Installation: Installation
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
Vehicles with carbon ceramic brakes
- Apply a small amount of grease to the hub and wheel mating surfaces before installation. Make sure the grease does not come into contact with the vehicles braking components and the wheel stud threads. Failure to follow these instructions may result in personal injury.
- Using power tools may result in damage to the wheel nuts. Make sure the wheel nuts are installed using hand tools only.
- Install the wheel and tire over the guide pins and fit 3 wheel nuts.
- Remove the guide pins.
- Remove 2 opposing wheel nuts.
- Tighten the wheel nuts in the indicated sequence.
- TORQUE SPECIFICATION: 112 Nm
All vehicles
- Raise and support the vehicle.
- TORQUE SPECIFICATION: 112 Nm
CAUTION:
CAUTION:
Using power tools may result in damage to the wheel nuts. Make sure the wheel nuts are installed using hand tools only.
WARNING:
Make sure to support the vehicle with axle stands.