LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Wheels & Tires -- XK/X150) >> Wheels And Tires >> Tire Pressure Monitoring System Module - Convertible (G542801) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cover and disconnect the battery ground cable.

    For additional information, refer to: BATTERY AND CHARGING SYSTEM - GENERAL INFORMATION .

  2. Make the SRS system safe.
  3. Remove the LH roll over protection unit.
  4. Remove the rear seat RH backrest retaining bracket.
    G11504262
    • Remove the 2 nuts and 2 bolts.
  5. Remove the RH roll over protection unit.
    G11504263
    • Disconnect the electrical connector.
    • Remove the 4 Torx bolts.
  6. Release the auxiliary junction box mounting bracket.
    G11504264
    • Remove the 3 nuts.
  7. Remove the tire pressure monitoring module.
    G11504265
    • Remove the 2 nuts.
    • Disconnect the 2 electrical connectors.
scientia non olet · About LEMON Manuals