Fuel Pump Driver Module
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
The FPDM controls the speed of the fuel pump to match the fuel demand of the engine. The FPDM is installed in the RH end of the evaporative emission canister.
The pump speed required is calculated by the ECM (engine control module) and transmitted to the FPDM in a PWM (pulse width modulation) signal.