LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Body Closures -- XK/X150) >> Body Closures >> Luggage Compartment Lid >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the luggage compartment lid trim panel.
  2. Disconnect the 4 luggage compartment lid harness electrical connectors.
  3. G11524030

    Release the wiring harness.

    • Remove the electrical harness clip.
  4. Release the electrical harness.
    • Release the electrical harness clip.
  5. G11524031

    Release the clips and disconnect the struts.

  6. G11524032

    With assistance, remove the luggage compartment lid.

    • Remove the 4 nuts.
  7. NOTE: Do not disassemble further if the component is removed for access only.
    G11524033

    Remove the luggage compartment lid latch operating cable from the lock cylinder.

    • Release the cable from the clip.
  8. G11524034

    Remove the luggage compartment lid latch assembly.

    • Remove the 3 Torx bolts.
  9. Remove the bump stops.
  10. G11524035

    Remove the luggage compartment lid lock cylinder.

  11. G11524036

    Remove the rear spoiler.

    • Disconnect the electrical connector.
    • Release the 3 wiring harness clips.
    • Remove the 2 bolts.
    • Release the 9 clips.
  12. Remove the license plate lamp housing.
  13. G11524037

    Remove the luggage compartment lid finisher.

    • Disconnect the license plate lamp electrical connector.
    • Remove the grommets.
    • Remove the 4 bolts.
    • Release the 4 clips.
    • Release the 4 clips.
  14. G11524038

    Remove both rear lamp assemblies.

    • Remove the 6 nuts.
    • Disconnect the 2 electrical connectors.
  15. G11524039

    Remove the luggage compartment lid wiring harness.

    • Release the 8 wiring harness securing clips.
  16. Remove the luggage compartment lid decals.
    • Wipe the luggage compartment lid to remove all traces of the adhesive.
    • Polish the area to remove any bleaching.