LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Body Closures -- XK/X150) >> Body Closures >> Liftgate >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the liftgate lower trim panel.

    For additional information, refer to: Liftgate Lower Trim Panel

  2. Disconnect the rear screen electrical connectors.
  3. G11524052

    Release the body harness from the liftgate.

    • Release the 15 clips.
    • Disconnect the 5 electrical connectors.
    • Release the 2 harness grommets and withdraw the harness from liftgate.
    4. NOTE: Support the lifgate as necessary.
  4. G11524053

    Release the liftgate support struts.

    • Release the 2 clips.
  5. G11524017

    With assistance, remove the liftgate.

    • Remove the 4 Torx bolts.
scientia non olet · About LEMON Manuals