LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Body Closures -- XK/X150) >> Body Closures >> Hood Alignment >> General Procedures >> Special Tool(S)

Special Tool(S)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
G11524002
 501-119 
Actuator Aligners - Pedestrian Protection Hood Stops
  1. With assistance, loosen the 8 nuts securing the hood to the hinges.
  2. G11524003

    Release the hood support struts.

  3. Lower the hood and check for alignment.

    For additional information, refer to: Body and Frame

    • Adjust as necessary.
  4. Raise the hood.
    • Tighten the nuts to 25 Nm (18 lb.ft). Connect the hood support struts.
  5. G11524004

    Align the hood to the pedestrian protection actuators using special tools 501-119.

    • Insert special tools 501-119, into the pedestrian protection actuators.
    • Loosen the 8 bolts securing the pedestrian protection actuator stops to the hood.
    • Gently close the hood so that the pedestrian protection hood stops are aligned to the actuators.
    • Open the hood.
    • Tighten the bolts to 10 Nm (7 lb.ft).
scientia non olet · About LEMON Manuals