LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Body Closures -- XK/X150) >> Body Closures >> Hood >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11524003

    With assistance, remove the hood.

    • Release the clips and disconnect the struts.
    • Remove the 8 nuts.
  2. NOTE: Do not disassemble further if the component is removed for access only.
  3. Remove the hood seal end caps.

    • Release from the 4 clips.
  4. G11524025

    Remove the hood seal.

    • Release the hood seal.
    • Remove the 17 clips.
  5. G11524026

    Remove the hood pad.

    • Remove the 23 clips.
  6. G11524026

Remove the 2 secondary hood pads.