LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Noise, Vibration & Harshness -- XK/X150) >> Noise, Vibration And Harshness >> Diagnosis And Testing >> Pinpoint Tests >> Pinpoint Test E: Non-Axle Noise

Pinpoint Test E: Non-Axle Noise

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. E1: INSPECT VEHICLE TRIM 
    1. Check the grille and trim mouldings to see if they are the source of the noise.

    Are the vehicle trim components causing the noise?

    • Yes  : INSTALL new trim or REPAIR as necessary.
    • No: GO to  E2.
  2. E2: CHECK THE A/C SYSTEM FOR NOISE 
    1. Check the A/C system components for noise by turning the A/C system on and off.

    Is the A/C system causing the noise?

  3. E3: CHECK NON-FACTORY ACCESSORIES 
    1. Inspect any accessories for being the source of the noise.

      Example: grounding body-to-frame, antennas, visors, bug deflectors and fog lights.

    Are the accessories the cause of the noise?

    • Yes  : ADJUST, REPAIR or INSTALL new accessories or fasteners as required.
    • No  : Verify the customer concern
scientia non olet · About LEMON Manuals