LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Audio Unit -- XK/X150) >> Audio Unit >> Audio Unit >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This component is easily recognized as a CD multichanger, it is however an audio module and links to the MOST.
  1. Disconnect the battery ground cable.

    For additional information, refer to: Battery Disconnect And Connect

  2. Remove the navigation screen module.

    For additional information, refer to: Navigation System Display Module

  3. See Figure
    GJ0009330

    Release the audio/CD module and climatic control assembly.

    • Remove the 4 module bracket Torx bolts.
    4. CAUTION: Care must be taken to avoid damage to the mating surfaces.
  4. See Figure
    GJ0009331

    Separate the climatic control and audio/CD module from the module bracket.

    • Remove 2 Torx screws securing the navigation screen to the climatic control assembly.
    • Remove the 4 Torx bolts.
  5. See Figure
    GJ0009332

    Remove the CD unit.

    • Remove the 2 Torx screws.
scientia non olet · About LEMON Manuals