LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Starting System - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XK/X150) >> Starting System - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol >> Starting System - Vehicles With Smart Key >> Diagnosis And Testing >> Pinpoint Tests >> Pinpoint Test C: Press Start And Brake - (Message Displayed)

Pinpoint Test C: Press Start And Brake - (Message Displayed)

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. C1: ENGINE FAILS TO CRANK 
    1. Check that there is sufficient brake pressure, (Automatic transmission only). Attempt another start making sure that the brake pedal is pressed firmly so the message is no longer displayed. In certain conditions this may require a more effort than usual

    Has the vehicle started?

    • Yes  : No further action required
    • No  : Contact dealer technical support
NOTE:
  • Conditions for starting in addition to pressing the start button are
  • For automatic transmission vehicles, ensure the brake pedal is depressed and the park or neutral selected
  • If the engine can be heard to crank there is no fault with the smart key
  • If the locking pin is still engaged, turn the steering wheel to overcome the side load
  • Start authorization defined as Ignition functions, Steering column lock engagement, Engine immobilize and smart key authorization
scientia non olet · About LEMON Manuals