LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Starting System - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XK/X150) >> Starting System - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol >> Starter Motor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Battery Disconnect and Connect
    2. WARNING: Make sure to support the vehicle with axle stands.

  2. Raise and support the vehicle.

  3. Refer to: Air Deflector
  4. G11287261

    Torque Specification: 6 Nm 

    5. CAUTION: Make sure that the protective cover is correctly installed over the electrical connector.
  5. G11508550

    Torque Specification: 12 Nm 

    6. CAUTION: Make sure that the protective cover is correctly installed over the electrical connector.
  6. G11299589

    Torque Specification: 12 Nm 

    7. NOTE: The upper bolt will remain captive.
  7. G11293775

    Torque Specification: 48 Nm 

  8. G11293776
scientia non olet · About LEMON Manuals