LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Exhaust System - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XK/X150) >> Exhaust System - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol >> Right Catalytic Converter >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
    WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

  1. Raise and support the vehicle.

  2. Refer to: Air Deflector
  3. Refer to: Exhaust System 
  4. G11542137
  5. G11542138
    6. NOTE: Tighten the top nut first.
  6. G11542359

    Torque Specification: 

    Top nut 40 Nm 

    Bottom nut 40 Nm 

    7. NOTE: If the original sensor is to be installed, apply lubricant meeting specification ESE-M12A4-A to the thread of the sensor.
  7. G11512657

    Torque Specification: 48 Nm 

scientia non olet · About LEMON Manuals