LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Exhaust System - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XK/X150) >> Exhaust System - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol >> Exhaust System - (XK-RS) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe due care when working near a hot exhaust system.
NOTE: Removal steps in this procedure may contain installation details.
    WARNING: Make sure to support the vehicle with axle stands.

  1. Raise and support the vehicle.

    2. NOTE:
    • LH illustration shown, RH is similar.
    • The step must be carried out on both sides.
  2. G11512677
  3. G11512678

    Torque Specification: 25 Nm 

  4. G11512679

    Torque Specification: 25 Nm 

    5. CAUTION: Make sure that the exhaust system is supported with suitable retaining straps.
  5. G11512680
  6. G11512681

    Torque Specification: 50 Nm 

    7. NOTE:
    • LH illustration shown, RH is similar.
    • The step must be carried out on both sides.
  7. G11512682
  8. G11512683
scientia non olet · About LEMON Manuals