LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Instrument Panel & Console -- XK/X150) >> Instrument Panel And Console >> Glove Compartment >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the glove compartment.
    • Install the lamp assembly.
    • Connect and secure the electrical connectors.
    • Tighten the Torx screws.
  2. Install the passenger side footwell trim panel.
    • Carefully secure the clips.
  3. Install the instrument panel end trim panel.
    • Release the door aperture seal.
    • Carefully secure the clips.
    • Install the aperture seal.
scientia non olet · About LEMON Manuals