DTC B10AC-87: Cruise control switch - Missing message: Action
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the appropriate electrical circuit wiring diagrams and check the power and ground connections to the speed control module. Using the manufacturer approved diagnostic system, complete a LIN network integrity test
- Refer to the appropriate electrical circuit wiring diagrams and check the LIN network between the speed control module and instrument panel cluster control module
- If no circuit faults are present, check and install new switch as required. Clear diagnostic trouble code and retest
- If diagnostic trouble code persists, check and install new speed control module. Refer to the warranty policy and procedures manual, or determine if any prior approval program is in operation, prior to the installation of a new module/component