LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Rear Suspension -- XK/X150) >> Rear Suspension >> Rear Wheel Bearing - (XKRS Gt) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING: Make sure to support the vehicle with axle stands

  1. Raise and support the vehicle.

  2. Refer to: Wheel and Tire
  3. G11283906
  4. G11283907
  5. G11283620
  6. G11283909
  7. G11283857
  8. G11283911
    9. CAUTION: Do not use a hammer to detach the halfshaft from the hub assembly, failure to follow this instruction may result in damage to the halfshaft.
  9. G11283912

    Special Tool(s):  205-491, 205-491-1, 204-269

    10. NOTE: Use an additional wrench to prevent the component from rotating.
  10. G11283913
  11. G11296669

    Special Tool(s):  204-726, 204-725

  12. G11296670

    Special Tool(s):  204-305, 204-726, 204-725

  13. G11283916
  14. G11296672

    Special Tool(s):  204-726

scientia non olet · About LEMON Manuals