LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Anti-Theft - Active -- XK/X150) >> Anti - Theft - Active >> Anti - Theft - Active (Description And Operation) >> Description And Operation >> Introduction >> Keyless Vehicle Module

Keyless Vehicle Module

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

The keyless vehicle module interfaces with the CLS (central locking system) RF receiver and collects RF signal information which is transmitted from the smart key. This information is translated into commands which are passed on the medium speed CAN (controller area network) bus to the CJB, AJB, the door modules and the instrument cluster.

The keyless vehicle module also monitors the liftgate external release switch, the two interior antennae, the luggage compartment antenna and an additional rear bumper antenna and two door handle antennae if the passive entry system is fitted.

On vehicles with passive entry, the additional fast latch motors are controlled via the keyless vehicle module and the locking status is passed to the CJB on the medium speed CAN bus.