LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Anti-Theft - Active -- XK/X150) >> Anti - Theft - Active >> Anti - Theft - Active (Description And Operation) >> Description And Operation >> Control Diagram >> Alarm

Control Diagram: Alarm

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

When the alarm is triggered, the CJB activates audible and visual warnings. The audible warning is produced using the vehicles horns, the passive anti - theft horn or the battery backed sounder, or a combination of these devices. The visible indication is produced using the turn signal indicators.

The CJB cycles the warnings on for 30 seconds and off for 5 seconds. At the end of the off period, if the alarm trigger is still present the CJB repeats the warning cycle. The CJB activates a maximum of 10 warning cycles (3 in some markets) for any one arming period. The CJB deactivates the alarm if the maximum number of warning cycles have been completed and the alarm trigger is still present, or ifit receives a disarm signal.

NOTE: If the battery backed sounder is triggered due to tamper detection, the visual indication using the turn signal indicators is not activated.

The alarm can be triggered if any of the hinged panels are opened, an intrusion detection module detects movement inside the vehicle, the tilt sensor detects vehicle movement, the CJB is disconnected or an ignitior tamper is detected (invalid smart key).