LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Automatic Transmission/Transaxle External Controls - V8 N/A 5.0L Petrol / V8 S/C 5.0L Petrol -- XK/X150) >> Automatic Transmission / Transaxle External Controls - V8 N/A 5.0L Petrol / V8 S/C 5.0L Petrol >> Emergency Park Position Release Lever >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. Refer to: Battery Disconnect and Connect (General Procedures).
  2. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Refer to: Floor Console - 5.0L (Removal and Installation).
  4. G11292414

    Torque specification: 11 Nm 

  5. G11512602

    torque specification: 25 Nm 

  6. G11512603

    torque specification: 10 Nm 

  7. CAUTION: Make sure that the cable is correctly routed.
    NOTE: Note the routing of the emergency park brake release cable.
    G11512604
  8. G11512605
  9. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
    G11292416
  10. G11512607

    torque specification: 6 Nm 

scientia non olet · About LEMON Manuals