LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Bumpers -- XK/X150) >> Bumpers >> Rear Bumper >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Always protect paintwork and glass when removing exterior components.
    WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
  1. Raise and support the vehicle.

  2. Remove the rear bumper cover.

    For additional information, refer to: Rear Bumper Cover 

  3. G11524770

    With assistance, remove the bumper.

    • Remove the 4 bolts.
  4. G11524771

    Remove the 2 crush tubes.

    • Remove the 8 nuts.