LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Bumpers -- XK/X150) >> Bumpers >> Front Bumper >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
    WARNING: Make sure to support the vehicle with axle stands.

  1. Raise and support the vehicle.

  2. For additional information, refer to: Front Bumper Cover 
  3. G11524712
  4. NOTE:
    • RH illustration shown, LH is similar.
    • The step must be carried out on both sides.
    G11524713
  5. G11305957

    TORQUE SPECIFICATION: 9 Nm

  6. G11524715

    TORQUE SPECIFICATION: 45 Nm

    7. NOTE: Do not disassemble further if the component is removed for access only.
  7. G11524716
    8. NOTE:
    • LH illustration shown, RH is similar.
    • The step must be carried out on both sides.
  8. G11524717

    TORQUE SPECIFICATION: 10 Nm

scientia non olet · About LEMON Manuals