Removal And Installation: Removal
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removal steps in this procedure may contain installation details.
-
Raise and support the vehicle.
- Refer to: Front Bumper Cover
- RH illustration shown, LH is similar.
- The step must be carried out on both sides.
Torque Specification: 9 Nm
Torque Specification: 45 Nm
- LH illustration shown, RH is similar.
- The step must be carried out on both sides.
WARNING:
Make sure to support the vehicle with axle stands.
NOTE:
NOTE:
Do not disassemble further if the component is removed for access only.
NOTE:
Torque Specification: 10 Nm