LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Vehicle Dynamic Suspension -- XK/X150) >> Vehicle Dynamic Suspension >> Diagnosis And Testing >> Inspection And Verification

Inspection And Verification

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern
  2. Visually inspect for obvious signs of damage and system integrity

    Visual Inspection 

    MECHANICAL ELECTRICAL
    • Coil spring(s)
    • Shock absorber(s)
    • Accelerometer(s) installation
    • Height sensor(s) installation
    • Fuse(s)
    • Wiring harness/electrical connectors
    • Accelerometer(s)
    • Adaptive damping control module
    • Height sensor(s)
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
  4. If the cause is not visually evident, check the system for any logged diagnostic trouble codes (DTCs) and refer to the relevant DTC index