LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Vehicle Dynamic Suspension -- XK/X150) >> Vehicle Dynamic Suspension >> Adaptive Damping Module - Convertible >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the active damping module.
    • Tighten the nuts to 10 Nm.
    • Connect the electrical connectors.
  2. Install the RH roll over protection unit.

    For additional information, refer to: ROLLOVER PROTECTION UNIT (Removal and Installation)

  3. Connect the battery ground cable and install the cover.

    For additional information, refer to: SPECIFICATIONS .

scientia non olet · About LEMON Manuals