Brake Lining And Disc Specifications
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
| ITEM | SPECIFICATION |
|---|---|
| Front brake pad material nominal thickness | 13 mm (0.51 in) |
| Front brake pad material minimum thickness | 2 mm (0.08 in) |
| Rear brake pad material nominal thickness | 10.8 mm (0.43 in) |
| Rear brake pad material minimum thickness | 2 mm (0.08 in) |
| Front brake disc diameter - Vehicles with standard brakes | 355 mm (14.0 in) |
| Front brake disc diameter - Vehicles with high performance brakes | 380 mm (15.0 in) |
| New front brake disc nominal thickness - Vehicles with standard brakes | 32 mm (1.26 in) |
| New front brake disc nominal thickness - Vehicles with high performance brakes | 36 mm (1.42 in) |
| Worn front brake disc minimum thickness - Vehicles with standard brakes | 30 mm (1.18 in) |
| Worn front brake disc minimum thickness - Vehicles with high performance brakes | 34 mm (1.34 in) |
| Rear brake disc diameter - Vehicles with standard brakes | 326 mm (12.8 in) |
| Rear brake disc diameter - Vehicles with high performance brakes | 376 mm (14.8 in) |
| New rear brake disc nominal thickness - Vehicles with standard brakes | 20 mm (0.79 in) |
| New rear brake disc nominal thickness - Vehicles with high performance brakes | 26 mm (1.02 in) |
| Worn rear brake disc minimum thickness - Vehicles with standard brakes | 18 mm (0.72 in) |
| Worn rear brake disc minimum thickness - Vehicles with high performance brakes | 24 mm (0.94 in) |
| Maximum front brake disc runout (installed) | 0.075 mm (0.003 in) |
| Maximum rear brake disc runout (installed) | 0.09 mm (0.004 in) |
| Maximum front hub face runout (installed) | 0.015 mm (0.0006 in) |
| Maximum rear hub face runout (installed) | 0.025 mm (0.0009 in) |
| Front brake sliding caliper single piston diameter - Vehicles with standard brakes | 60 mm (2.36 in) |
| Front brake sliding caliper double piston diameter - Vehicles with high performance brakes | 42 mm (1.66 in) |
| Rear brake sliding caliper single piston diameter | 45 mm (1.77 in) |
| Front brake caliper bleed screw | 14 Nm (10 lb-ft) |
| Rear brake caliper bleed screw | 14 Nm (10 lb-ft) |