LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Air Conditioning -- XK/X150) >> Air Conditioning >> Removal And Installation >> Thermostatic Expansion Valve (G545135) >> Installation

Thermostatic Expansion Valve (G545135): Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Lubricate the new seals with clean refrigerant oil.
    NOTE: Make sure all component mating faces are clean.

    Install the TXV assembly.

    • Install the new O-ring seals.
    • Install and tighten the Allen bolts to 6 Nm (4 lb.ft).
    • Replace the TXV insulation.
  2. Install the heater and evaporator core housing.

    For additional information, refer to: Heater Core and Evaporator Core Housing (Removal and Installation).

  3. Connect the battery ground cable and install the cover.
scientia non olet · About LEMON Manuals