LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Climate Control System - General Information -- XK/X150) >> Climate Control System - General Information >> Refrigerant Oil Adding >> General Procedures >> Activation

General Procedures: Activation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Collect the refrigerant oil in a clean measuring cylinder.
  • Make sure that all openings are sealed. Use new blanking caps.
NOTE: Removal steps in this procedure may contain installation details.
    NOTE: This step only needs to be carried out when removing the air conditioning (A/C) compressor.
  1. G11292800

    Torque Specification: 15 Nm 

    2. NOTE: This step only needs to be carried out when removing the air conditioning (A/C) compressor.
  2. G11292801

    Rotate the A/C compressor shaft at least 6 to 8 turns when draining the refrigerant oil.

    3. CAUTION:
    • The refrigerant oil top-up quantity must not exceed the refrigerant oil fill quantity.
    • If other A/C components are being renewed in addition to the A/C compressor, there is no need to top up with additional refrigerant oil, apart from filling the A/C compressor.

  3. Top up with the calculated quantity of new refrigerant oil.

  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals