Front Wheel Bearing And Wheel Hub - V8 N/A 4.2L Petrol/V8 S/C 4.2L Petrol (G537332): Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:
- Align to the position noted on removal.
- Make sure that all the component mating faces are clean.
LH front: Carefully install the hub assembly.
- Clean the component mating faces.
- Tighten the bolts to 90 Nm (66 lb.ft).
Install the wheel speed sensor.
- Secure the clip.
NOTE: Use an additional wrench to prevent the ball joint rotating.

Install the stabilizer bar link.
- Tighten the nuts to 48 Nm (35 lb.ft).
Install the brake disc.
For additional information, refer to: Brake Disc - Vehicles With: Standard Brakes (Removal and Installation).