LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Front Suspension -- XK/X150) >> Front Suspension >> Removal & Installation >> Front Shock Absorber (G1076247) >> Installation

Front Shock Absorber (G1076247): Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION: Make sure that these components are installed to the noted removal position.
    G11296594

    Torque Specification: 27 Nm 

  2. G11296593
  3. G11296592
  4. G11296591
  5. G11296590

    Torque Specification: 27 Nm 

  6. G11296589

    Torque Specification: 175 Nm 

  7. G11296588
  8. G11296587

    Torque Specification: 

    Stage 1: 60 Nm 

    Stage 2: 135° 

  9. G11296586

    Torque Specification: 90 Nm 

  10. G11296585
  11. NOTE: Use an additional wrench to prevent the ball joint rotating.
    G11296584
    • Torque Specification: 43 Nm 

    • Torque Specification: 70 Nm 

  12. Refer to: Wheel and Tire (Removal and Installation).