LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Automatic Transmission/Transaxle - V8 N/A 5.0L Petrol / V8 S/C 5.0L Petrol -- XK/X150) >> Automatic Transmission / Transaxle - V8 N/A 5.0L Petrol / V8 S/C 5.0L Petrol >> Input Shaft Seal >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Battery Disconnect and Connect (General Procedures).
  2. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

    Raise and support the vehicle.

  3. G11291629

    Special Tool(s):  307-613

  4. CAUTION:
    • Take extra care not to damage the edges of the component.
    • Discard the seal.
    G11291630

    Special Tool(s):  100-012, 100-012-01, 308-375

scientia non olet · About LEMON Manuals