Special Tool(S): Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles

NOTE: Make sure that the alignment mark on the driveshaft is correctly aligned to the alignment mark on the differential case.

To install, reverse the removal procedure.
NOTE:
- This step only applies if a new driveshaft is being installed.
- Using the 3mm hole on the differential case flange and paint alignment mark on the driveshaft (as indicated). Make sure that the alignment marks are correctly aligned.
Torque Specification: 75 Nm
Check and top-up the differential case.

Torque Specification: 34 Nm

Vehicles with supercharger