LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Evaporative Emissions - V8 5.0L Petrol/V8 S/C 5.0L Petrol -- XK/X150) >> Evaporative Emissions - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol >> Evaporative Emissions - V8 N/A 5.0L Petrol >> Diagnosis And Testing >> Smoke Testing

Smoke Testing

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

Smoke testing should be used to identify a leak only when instructed by Dealer Technical Support. Refer to the manufacturer's instructions for information regarding using the smoke test equipment. Smoke may be introduced into the fuel system via the purge hose, the fuel filler neck or the DMTL filter housing. When introducing smoke via the DMTL filter housing, use the manufacturer approved diagnostic system to perform routine - Evaporative System Diagnostic Check - to ensure that the DMTL changeover valve is energized and the DMTL pump is running.

scientia non olet · About LEMON Manuals