LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Wipers & Washers -- XK/X150) >> Wipers And Washers >> Wiper Pivot Arm >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Always protect paintwork and glass when removing exterior components.
  1. Open the hood.
  2. G11523934

    Remove the RH air intake cover.

    • Remove the 3 clips.
  3. CAUTION: Wipers arms do not lock in the upright position. Windshield damage may occur if the wiper pivot arms are allowed to drop against the glass.
    NOTE: RH illustration shown, LH is similar
  4. G11524554

    Remove the windshield wiper arms.

    • Remove the 2 access plugs.
    • Remove the 2 nuts.
    • Disconnect the 2 washer jet blocks from the cowl vent screen.
  5. G11524555

    Remove the wiper blades.

    • Release the 2 clips.