LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Wipers & Washers -- XK/X150) >> Wipers And Washers >> Windshield Washer Pump >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new seal.
  2. Install the windshield washer pump.
    • Connect and secure the electrical connector.
    • Connect the washer jet hose.
  3. Install the fender splash shield.

    For additional information, refer to: Fender Splash Shield

  4. Refill the washer reservoir.
scientia non olet · About LEMON Manuals