Description And Operation: Introduction
The wipers have 2 speed controls, normal and fast, and a rain sensor activated mode. The wipers will park automatically irrespective of their position, when the ignition or the wiper control column switch is selected off.
A timed washer jet function eliminates the trail of washer fluid left on the windshield after a wiping action and reduces fluid consumption by only operating the washer jets on the up stoke of the wiper arms. This function can be configured using Jaguar approved diagnostic equipment.
Within the wiper and washer system the following features can be attained:
- Speed dependant wiping
- Programmable wash and wipe sequencing
- Automatic moisture sensitive wiping (rain sensor).
Moisture sensitive wiping will be initiated when the vehicle is running and not in the PARK or NEUTRAL gear position. The wiper switch must be in the rain sensor activated position.
The CJB (central junction box) controls the system and features.