Inputs And Outputs
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
The CJB receives and sends the following wiper and washer system inputs and outputs:
Inputs
- Intermittent wipe switch
- Rain sensor
- Normal (slow) speed continuous switch
- Fast speed continuous switch
- Flick wipe switch
- Wash switch
- Stop/start switch
- Lighting switch
- Low level reservoir status, via medium speed CAN (controller area network) bus
- Vehicle speed, via medium speed CAN bus
- Wiper motor park switch
- Ambient temperature, via medium speed CAN bus.
Outputs
- Wiper motor (normal)
- Wiper motor (fast)
- Windshield washer pump
- Headlamp power wash pump.