LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Anti Lock Control - Stability -- XK/X150) >> Anti-Lock Control - Stability Assist >> Yaw Rate Sensor And Accelerometer (G1183583) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: BATTERY DISCONNECT AND CONNECT (General Procedures).
  2. Refer to: Floor Console (Removal and Installation).
  3. CAUTION: Make sure that all diagnostic trouble codes (DTCs) have been removed after the road test.
    NOTE: Make sure that this component is installed to the noted removal position.
    G11512122

Torque specification  : 6 Nm