DTC C1B00-49: Steering Angle Sensor - Internal electronic failure: Action
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
- Check the installed position of the steering angle sensor. Remove and reinstall if required. Clear DTC. The sensor is calibrated at every new ignition cycle, every time the vehicle is driven away from standstill. Retest system. If fault returns suspect sensor. Refer to the Warranty Policy and Procedures manual if a module/component is suspect