LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Safety Belt System -- XK/X150) >> SEATBELT System >> Front Safety Belt Buckle (G539368) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat safety belt pretensioner.
    • Connect and secure the electrical connector.
    • Tighten the new Torx bolt to 45 Nm (33 lb.ft).
  2. Secure the front seat backrest cover lower tension straps.
  3. Install the front seat.

    For additional information, refer to: FRONT SEAT REMOVAL AND INSTALLATION .

  4. Connect the battery ground cable and install the cover.
scientia non olet · About LEMON Manuals