SEATBELT Locking Test
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
With the vehicle stationary and on level ground take firm hold of the seatbelt webbing (on the tongue side of the upper seatbelt anchor) and withdraw sharply, the retractor should lock. Preventing further webbing release (repeat this test 3 times) . Any seatbelt retractor which fails to lock must not be used and a new seatbelt must be installed , Refer to REMOVAL AND INSTALLATION .