LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Supplemental Restraint System -- XK/X150) >> Supplemental Restraint System >> Driver Airbag Module >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the driver air bag module.
    • Connect the electrical connectors.
    • Carefully align and secure the clips.

  2. Connect the battery ground cable and install the cover. For additional information, refer to: BATTERY, MOUNTING AND CABLES -- XK/X150 (Specifications).

  3. Connect WDS to the vehicle and configure a new module.
scientia non olet · About LEMON Manuals