LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Seating -- XK/X150) >> Seating >> Rear Seat Backrest >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear seat backrest.
    • Secure in the retainers.
    • Tighten the Torx bolt to 10 Nm (7 lb.ft).
  2. Install the auxiliary junction box access cover.
    • Align the pegs and secure the clip.
  3. Install the LH rear seat cushion.

    For additional information, refer to: Rear Seat Cushion  (Removal and Installation).

    • Secure with the clips.
  4. Install the RH rear seat cushion.
scientia non olet · About LEMON Manuals