LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Seating -- XK/X150) >> Seating >> Front Seat Lumbar Motor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make the SRS system safe.

    For additional information, refer to: GENERAL PROCEDURES .

  2. Remove the front seat.

    For additional information, refer to: FRONT ROW SEAT (G532581)  (Removal and Installation).

  3. G11524261

    Release the front seat backrest cover lower tension straps.

    • Release from the seat frame.
  4. G11524262

    Release the 9 front seat backrest cover rear panel retaining clips.

    • Release from the backrest cover.
    • Release from the seat frame.
  5. G11524297

    Release the front seat lumbar assembly.

    • Release the 3 electrical connectors.
    • Remove the clip.
    • Disconnect the electrical connector.
  6. Remove the front seat lumbar assembly.
scientia non olet · About LEMON Manuals