LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Seating -- XK/X150) >> Seating >> Front Seat Lumbar Motor >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat lumbar assembly.
  2. Secure the front seat lumbar assembly.
    • Install the clip.
    • Connect the electrical connector.
    • Secure the electrical connectors.
  3. Secure the front seat backrest cover rear panel retaining clips.
    • Attach to the seat frame.
    • Attach to the backrest cover.
  4. Secure the front seat backrest cover lower tension straps.
    • Attach to the seat frame.
  5. Install the front seat head restraint.
  6. Install the front seat.

    For additional information, refer to: FRONT ROW SEAT (G532581)  (Removal and Installation).

scientia non olet · About LEMON Manuals