LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Seating -- XK/X150) >> Seating >> Front Seat Cushion Heater Mat >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat cushion heater mat.
    • Secure to the seat cushion pad.
  2. Install the front seat cushion cover.
  3. Secure the front seat cushion assembly.
    • Connect and secure the electrical connectors.
    • Secure the Velcro strap.
    • Attach the clips.
  4. Secure the front seat backrest cover lower tension straps.
  5. Install the front seat cushion outer trim panel.
    • Connect the electrical connector.
    • Secure in the clips.
  6. Secure the front seat cushion outer trim panel.
    • Tighten the Torx screws.
  7. Install the front seat hinge covers.
    • Attach the hinge cover retainers.
    • Tighten the Torx screws.
  8. Install the front seat.

    For additional information, refer to: FRONT ROW SEAT (G532581)  (Removal and Installation).

  9. Connect the battery ground cable and install the cover.
scientia non olet · About LEMON Manuals