LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Seating -- XK/X150) >> Seating >> Front Row Seat Cushion Cover >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat cushion cover.
  2. Secure the front seat cushion assembly.
    • Connect and secure the electrical connectors.
    • Secure the Velcro strap.
    • Attach the clips.
  3. Secure the front seat backrest cover lower tension straps.
  4. Install the front seat cushion outer trim panel.
    • Connect the electrical connector.
    • Secure in the clips.
  5. Secure the front seat cushion outer trim panel.
    • Tighten the Torx screws.
  6. Install the front seat hinge covers.
    • Attach the hinge cover retainers.
    • Tighten the Torx screws.

  7. Install the front seat.

    For additional information, refer to: FRONT ROW SEAT (G532581)  (Removal and Installation).

  8. Connect the battery ground cable and install the cover.
scientia non olet · About LEMON Manuals