LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2011 >> XK 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Uni-Body, SUBFRAME & Mounting System -- XK/X150) >> Uni-Body, SUBFRAME And Mounting System >> Rear SUBFRAME Front Bushing >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles 

    NOTE: Align to the position noted on removal.
  1. See Figure
    G11306615

    Using the special tools, Install the new front bushings.

    Vehicles with 4.2L engine 

  2. Install the rear subframe.

    For additional information, refer to: Rear Subframe

    Vehicles with 5.0L engine 

  3. Install the rear subframe.

    For additional information, refer to: Rear Subframe - 5.0L 

    All vehicles 

  4. Connect the battery ground cable.

    For additional information, refer to: Battery Disconnect and Connect