Removal And Installation: Removal

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2015 Jaguar XKR-S, 2015 Jaguar XKR, 2015 Jaguar XK, 2014 Jaguar XKR-S, and 2014 Jaguar XKR. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Make sure all smart keys are available before a new instrument cluster is installed.

If a new instrument cluster is being installed, all smart keys must be cleared from the passive anti-theft system (PATS), using the Jaguar approved diagnostic equipment prior to the instrument cluster removal.
Remove the instrument panel driver's side reinforcement trim panel.
- Carefully release the 4 clips.

CAUTION: Protect the surrounding trim from damage when changing the component.

Remove the instrument cluster surround.
- Remove the 3 screws.
Remove the instrument cluster.
- Raise the steering column finisher for access to the lower screws.
- Remove the 4 screws.
- Disconnect the 2 electrical connectors.